We are Jiangsu WELLJOIN. We make round or shaped lip gloss tubes. We provide the inner plug, rod, and brush as a complete set. Many lip gloss brands use our plastic lip gloss tubes. We give a 2-year warranty on these plastic lip gloss tubes. You get a leak-proof design.
Key Data Table
|
Parameter |
Value |
|
Material for body |
PETG or acrylic |
|
Brush to neck gap |
under 0.2 mm |
|
Inverted test |
48 hours – no leak |
|
Brush pull-out force |
at least 10 N |
|
Warranty |
2 years |
|
Custom sample |
7-10 days |
|
MOQ |
10,000 pcs |
These plastic lip gloss tubes use PETG or acrylic for the body. The lid uses ABS. The rod uses PP. The brush uses nylon fibers. We use injection molding and precision assembly. The gap between the brush and the tube neck is under 0.2 mm. That prevents leakage. Each batch goes through a leak test. We turn the tube upside down for 48 hours. No leak. We also test brush pull-out force. It must be at least 10 N. Workers check 100% of the products.
The inner plug at the tube neck has a precise taper. When you pull out the rod, the inner plug scrapes off excess product. That saves your lip gloss. A Guangzhou lip gloss brand needed a 5ml tube. We gave them a PETG tube with a flocked brush. They tested the leak-proof performance. No leak. Their first order was 50,000 pieces. Now they reorder every quarter. Capacities are from 3ml to 8ml. Sample takes 7 to 10 days. MOQ is 10,000 pieces. You can spray paint, electroplate, or silk screen your logo. We support OEM and ODM. New mold development takes 15 to 25 days. We give a shipment inspection report. If goods get damaged in transit, we send new ones for free.
Hot Tags: plastic lip gloss tubes, China plastic lip gloss tubes manufacturers, suppliers, factory
